SIUFO11S2XX CARLO GAVAZZI Ausgwählte Kriterien Funktion RS485/RS232 in Faseroptik-Bus Wandler Befestigung DI..

Energy Management
Fiber-optic converter
Type SIU-FO1 and SIU-FO2
SIU-FO1
• RS485/RS232 to single loop fibre optic conversion SIU-FO2
• RS485/RS232 to double loop fibre optic conversion
All models
• Communication speed selectable by means of dip-switches from 300 to 115200 bit/s
• Power supply from 12 to 18VAC or from 10 to 24VDC
• 4-DIN modules housing
• For DIN-rail mounting
Product Description
How to order
SIU-FO1 1 S2 XX
RS485 to Fiber-optic Bus converter. The unit is suitable, according to the model, to work with either single loop connection or double loop fiber-optic connection. The SIU-FO series has the task to
convert the standard Mod- Bus communication from RS485 type to Fiber-optic so to increase the distance between devices and to increase significantly the noise immunity.
Model
Power supply Communication port Option
Type Selection
Model, SIU-
FO1: Serial single loop fibre optic conversion
FO2: Serial double loop fibre optic conversion
(*) as standard.
(**) on request.
Power supply
1: 12 to 18VAC (48 to 62Hz) or
10 to 24VDC (*)
Communication port
XX: none (*)
S1: RS232 port (**) S2: RS485 port (*)
XX
XX: none (*)
Communication
RS485 port
Type Multidrop, bidirectional (static and dynamic variables)
Connections 2-wire + GND
Max. distance 1000m, termination directly on the module
LED Green: running communication (one LED per loop)
Yellow: reset status
Addresses 247, automatically managed by the unit
Protocol
Data (bidirectional) MODBUS/JBUS (RTU) Dynamic (reading only) All data
Static (reading and All data writing only)
Data format Selectable by means of dip-switches:
- 1 start bit,
- 8 data bit,
- none, even, odd parity
- 1 or 2 stop bits
Delay Selectable by means of dip-switches: 1 or 2ms.
Baud-rate Selectable by means of dip-switches: 300, 600,
1.2k, 2.4k, 4.8k, 9.6k,
19.2k, 38.4k, 57.6k,115.2k bit/s
Driver input capability 1/5 unit load. Maximum
160 transceivers on the same bus.
Insulation See “Insulation between inputs and outputs” table.
Specifications are subject to change without notice SIU-FO1 and SIU-FO2 DS ENG 120312 1